Posts Tagged With: Heirloom Frames 3D Embossing Folder

Stampin’ Up! Feels Like Frosty Woven Heirlooms

Well – here we are!  HAWWWMP DAY!!!  And only two days away from Brian King’s Stamping Event (on Friday) and then Onstage on Saturday!!  Whoo-hoo!!  It’s going to be a great weekend, y’all! 🙂

Now – on a slightly more somber note – I had need of a sympathy card this week.  🙁  So…I pulled out my Woven Heirlooms bundle and…some Feels Like Frost Specialty DSP to make one.  Take a look-see:

The layout is loosely based on the sketch side of this week’s FUSION challenge.

I started with two pieces of the Feels Like Frost Specialty DSP – both of the same pattern.  I matted one piece on Smoky Slate for the card front.

From the second piece, I cut the oval frame from the Heirloom Frames die set.  Then I embossed the frame in the matching 3D Embossing Folder.

I placed Stampin’ Dimensionals around the back of the frame and adhered it to the card front – aligning the pattern.

On the cut-out piece (the oval from the middle of the die cut frame), I used my Stamparatus to stamp the sentiment from Woven Heirlooms in Highland Heather ink.

I cut the second-largest scalloped oval from Smoky Slate using the Ovals Layering Dies and adhered the sentiment to it with Liquid Glue.

I slid the matted sentiment inside the popped-up frame and adhered it to the card front with Liquid Glue.

For the embellishment, I cut two little flowers with the Frosted Frames dies from Vellum card stock and one from Highland Heather card stock.  I also cut a Vellum pine bough with the Beautiful Boughs dies.

I colored the backs of the Frosted Frames vellum die cut flowers with my Dark Highland Heather Stampin’ Blend and the back of the pine boughs with my Dark and Light Pretty Peacock Blends.

I spread Shimmery Crystal Effects on the vellum die cuts and sprinkled them with Ice Stampin’ Glitter.

I created a “bouquet” by adhering the stems together with Liquid Glue – then adhered it to the frame with more Liquid Glue.

I tied a double-loop bow using a length of Whisper White Solid Baker’s Twine and one of Silver Metallic Thread, then added it with a Glue Dot.  A Pretty Peacock gem from the Noble Peacock Rhinestones pack finished it off.

On the inside, I used my Stamparatus to add a second sentiment from Woven Heirlooms in Highland Heather on a Whisper White panel.  Over that, I stamped the flower from the Frosted Foliage stamp set in Highland Heather that I stamped off THREE times before stamping the panel.  I added another Pretty Peacock gem to finish it off!

I used Liquid Glue to adhere the panel to a Smoky Slate mat and into my Pretty Peacock card base, popped the card front on with Stampin’ Dimensionals.

My Whisper White Medium Envelope got more Frosted Foliage flowers on the front in Highland Heather – I stamped the image four times without re-inking…

…and another piece of the Feels Like Frost Specialty DSP on the envelope flap.

Et Voila!  I hate needing this card, but…I hope that it will bring a smile to the recipient.  I love how several different bundles – some that are “holiday/Christmas” sets! – can be pulled together to make an unrelated card.  Woven Heirlooms is a beautiful set in its own right – and is especially gorgeous with the Feels Like Frost Specialty DSP and images from Frosted Foliage!  I hope you like!

TTFN
M

 

 

 

P.S.  Be sure to check out the awesome Pink Sky Bundles from Thirty-One Gifts! 🙂


HOST CODE FOR 1 NOV – 15 NOV: Q433WYHE

Use this host code when you order and receive a free gift from me! But, if your order is over $150, please don’t use this code (you’ll miss out on your own Stampin’ Rewards if you use it) but you’ll still get the free gift. The free gift is your choice of any item valued up to $10.00 from any active catalog! And – you can even select one of the Host-exclusive sets! See my Rewards page for more details.


Moose Punch Has Sold Out and Will Not Return

Our inventory of Moose Punch (item 150652) has been depleted and is no longer available for purchase.

That means the Merry Moose Bundle is also sold out and can’t be purchased.  But the good news is that the cute Merry Moose stamp set is still available!


GET IT NOW!!

I’ve had mine for a minute now – and I love it!  It cuts smooth and straight on a nice stable base!  You’re going to be happy to have it!  And just in time for all your Holiday crafting, too!

Paper Trimmer Deets

Item: 152392 | $25.00

  • 15-3/8 x 8 x 1/2” (39 x 20.3 x 1.3 cm)
  • Includes 1 cutting blade and 1 scoring blade.
  • Includes imperial and metric measurements.
  • Ruler and grid protected by durable plastic cover.
  • Point on cutting handle for precise measuring.
  • Right-side grid for cutting thin strips.
  • Cutting Blades Multipack will be available to purchase in January 2020.
    • Cutting Blades Multipack $12.00
    • Each Cutting Blades Multipack unit contains four blades.

So – get on over and get it right here!


Christmastime is Here is…HERE!!

Click the picture below to open a flyer with all the details – or just go right here to my Online Store to get these goodies for yourself right now!


Get the Stampin’ Up! Products Used in This Project:     Product List

Card Cuts Used in This Project:  

Pretty Peacock Card Stock: 5 1/2″ x 8 1/2″ (card base, scored and folded at 4 1/4″)

Smoky Slate Card Stock:  4″ x 5 1/4″ (mats for card front and for inner liner); 2 7/8″ Scalloped Ovals Die Cut (mat for sentiment)

Whisper White Card Stock:  3 7/8″ x 5 1/8″ (inner liner)

Vellum Card Stock: Frosted Frames and Beautiful Boughs die cuts

Highland Heather Card Stock: Frosted Frames die cut flowers

Feels Like Frost Specialty DSP:  3 7/8″ x 5 1/8″ (card front); Heirloom Dies die cut and embossed frame; envelope flap


If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!


Shop the Clearance Rack here. Earn FREE Stampin’ Up! Products – Join my Punkin Head Peppermint Rewards – My online customer thank you program!


Finn Fan Fix


Do you remember this photo from…like two years ago?  When The Man was still The Kid?

Well – this is Sunday in NC!

Still full-speed-ahead thru the grass!

Is the grass SHORTER or the dog TALLER!? 😉

TTFN
M

Categories: 2019 Holiday Catalog, 2019-2020 Annual Catalog, New Product, Sympathy, Thirty-One Gifts | Tags: , , , , | 8 Comments

Stampin’ Up! Here’s a Card with Woven Heirlooms!

Happy Happy….three-days-before-World-Card-Making-Day!!

What?  Expecting something else?? 😉

Okay – Happy HAWWWWMP Day!!

Better!? 😉

My card today is a CASE of the catalog.  Cuz…I was playing with a challenge that called for CASEing the catalog!  So…since it was focused on the Woven Threads suite…that’s what I used!  Along with…the Here’s a Card stamp set.  Take a look-see:

Continue reading

Categories: 2019-2020 Annual Catalog, Feminine, Happy Birthday, World Card Making Day 2019 | Tags: , , , , | 12 Comments

Stampin’ Up! Path of Pressed Petals Sympathy Card!

Good morning, y’all!  Here we are on Sunday!  The weekend progresses apace – WAY faster than two days during the week, don’t they?  What the heck is up with that??!

If you were able to join me last night for my FB live – I appreciate you spending part of your weekend with me.  If not, but you’d like to see the replay, here you go!

The card we made – a Sympathy card (but we all agreed this would be a wonderful wedding card – different sentiment, of course.  LOL) – uses some pieces and parts from the new Pressed Petals suite!  The new Pressed Petals Specialty DSP in this suite is my new fave-paper-of-all-time….ever!  And look what happens when you combine it with the Path of Petals stamp set and the Heirloom 3D Embossing Folders and Dies (that coordinate with the Woven Heirlooms stamp set).  Take a look-see:


Boom-chakalaka! 🙂

The layout for this one is from the Freshly Made Sketches challenge this week.


I started by adhering some wonderful linen-look paper from the Pressed Petals DSP to a Rococo Rose mat for the card front.  Then I took some of the wild roses paper, adhered it to Rococo Rose and then to the card front with Liquid Glue.

I created the frame using the new Heirloom 3D Embossing Folders and Dies – I’ll be getting the new 3D Embossing Folder Plate soon, but for now I used 4 sheets of cardstock as a shim.  I cut the frame from Crumb Cake first, then embossed it in the folder.  I used a Sponge Dauber to brush Crumb Cake over the embossed parts of the frame.


I used my Bone Folder to add some creases in the corners of the frame to create some depth, then I added the frame to the card front with Stampin’ Dimensionals.

I stamped the Path of Petals sentiment in Merry Merlot on Very Vanilla and cut it out with a Stitched Shapes Oval die.  Then I popped that inside the frame with Dimensionals.


I created the flower using “petals” from the new Pressed Petals Specialty Washi Tape and a 1/2″ Circle – you can see how in the video!  Then I added a Perennial Essence Floral Center.

I made a loop-de-loop with some Mossy Meadow Linen Thread from the Magnolia Lane Ribbon Combo and some Glue Dots, then adhered my flower over top with another Glue Dot, and the card front was done.


On the inside, I used stamped-off-once Mossy Meadow, Rococo Rose and Crumb Cake to add the three-step flower image from Path of Petals to the middle of a Very Vanilla Panel.  Over top I added a second sentiment from Path of Petals in Merry Merlot.


I used Liquid Glue to adhere the panel to a Rococo Rose mat and into my Thick Very Vanilla card base, popped the card front on with Stampin’ Dimensionals and the card was done.

My Very Vanilla Medium Envelope got the Path of Petals flowers in full-strength Mossy Meadow, Rococo Rose and Crumb Cake…


…and more of the wild rose paper from the Pressed Petals Specialty DSP on the envelope flap.


Et Voila! I think it’s pretty obvious why the Pressed Petals suite is going to be a fave of mine – and the Pressed Petals Specialty DSP already is!  Just go right ahead and get you a pack Right.  This.  Minute.  I mean it.  Don’t even wait!  Heck – get the whole suite – you won’t regret it one second!  I hope you like!

TTFN

 

 

 

P.S.  DO get the new 3D Embossing Folder Plate, y’all – it’s going to make your life much easier with our new folders!  Just sayin’!


HOST CODE FOR 1 JUN – 15 JUN: VXTTY7PW

Use this host code when you order and receive a free gift from me! But, if your order is over $150, please don’t use this code (you’ll miss out on your own Stampin’ Rewards if you use it) but you’ll still get the free gift. The free gift is your choice of any item valued up to $10.00 from any active catalog! And – you can even select one of the Host-exclusive sets! See my Rewards page for more details.


New 3D Embossing Folder Plate Now Available!

The new 3D Embossing Folder Plate (item 149658) is now available to order! It’s designed to work with our new-style 3D embossing folders (which are thinner than our old-style Dynamic folders).

You can click on the picture above and open the flyer – then print it and keep it by your embossing machine and new 3D Embossing Folder Plate.  It’s got your new “sandwich” information right on it!

Remember that carryover 3D embossing folders will not be available to order at the start of the new catalog but I’ll let you know when they’re available to order.

Also keep in mind that we expect to receive staggered plate shipments in all markets during June and July as we build inventory. Which means, you may experience periods of time when it is unavailable to order if inventory is depleted; it will become available to order again when inventory is replenished.

How to Use the New Plate

The new plate makes up the difference in measurement between our old-style Dynamic Folders and our new-style 3D Folders in most die-cutting machines. The 3D Embossing Folder Plate replaces the Standard Cutting Pads in your 3D embossing folder sandwich for continued high-quality emboss results.

To create your emboss sandwich:

  • Use a die-cutting & embossing machine platform as a base; no matter which machine you’re using, use the standard platform which comes with your machine.
  • Use the 3D Embossing Folder with your paper in the middle.
  • Then use the 3D Embossing Folder Plate on top.

Given the differences in machines and platforms, you may still have to add a shim to get your desired embossing results. (You can also spritz your paper before embossing to maximize your embossed impressions.)

Without the new 3D Embossing Folder Plate, you will need to use several shims with the Standard Cutting Pad in your 3D embossing folder sandwich, depending on the die-cutting & embossing machine you use. Most machines will need between three to five sheets of cardstock to shim. Please be careful in how you shim; start out with fewer sheets first, then add sheets to get your desired results.  Stampin’ Up! won’t be responsible for replacing products broken due to using a sandwich which is too thick for a machine.


Stamps-N-Lingers 2019-2020 Special Bundles Sale!

You’ve got until 15 June to take advantage of my LIMITED TIME Special Bundles to kick off the new catalog!  As has become my tradition, I’ve gathered up some goodies from the new Suites (and beyond!) in the 2019-2020 Annual Catalog that coordinate perfectly with each other and will get you well on the way to making great cards and projects!

When you select one of my bundles, you’ll get about a 15% savings on each bundle versus the price you’d pay if you bought the goodies on your own. All the bundles include FREE Shipping and will come directly to you.  And every bundle includes a FREE GIFT.

Check out the bundles I’ve put together for you this time – and then click here to get all the details and a list of what you’ll receive in each bundle.  There’s also a handy order form – and info on my Special Bonus!!  These deals are only available until 15 June, so…don’t miss out!


Bundle #1: 2019-2020 In Color Bundle – $99
BONUS:  When you purchase the 2019-2020 In Color Bundle, you’ll get to select a FREE Stampin’ Blends Combo of your choice!

Bundle #2: The Bird Watcher Bundle – $183
BONUS:  When you purchase the Bird Watcher Bundle, you’ll get the Beads & Baubles Embossing Folder FREE

Bundle #3: The Verdant Garden Bundle – $147
BONUS:  When you purchase the Verdant Garden Bundle, you’ll get the Magnolia 3D Embossing Folder FREE

Bundle #4: The Petals & Posies Bundle – $182
BONUS:  When you purchase the Petals & Posies Bundle, you’ll get the Scripty 3D Embossing Folder FREE

Bundle #5: The Wild & Wiggly Bundle – $131
BONUS:  When you purchase the Wild & Wiggly Bundle, you’ll get to select a FREE Stampin’ Blends Combo of your choice!

Bundle #6: The Let’s Hear It For The Boys Bundle – $154
BONUS:  When you purchase the Let’s Hear It For The Boys Bundle, you’ll get the High Seas 3D Embossing Folder FREE!

Bundle #7: The Emboss Everything Bundle – $86
BONUS:  When you purchase the Emboss Everything Bundle, you’ll get to select a FREE Stampin’ Blends Combo of your choice!

Bundle #8: The Color Me Pretty Bundle – $99
BONUS:  When you purchase the Color Me Pretty Bundle, you’ll get to select a FREE Stampin’ Blends Combo of your choice!

Folks – when you select one or more of the bundle above, then you also will have the option to select one or more of these Add-On Bundles!

ADD ON RIBBON BUNDLE – $44

ADD ON BLENDS BUNDLE  – $49


Get the Stampin’ Up! Products Used in These Projects: 

Card Cuts Used in This Project:

Thick Very Vanilla Card Stock: 5 1/2″ x 8 1/2″ (card base, scored and folded at 4 1/4″)

Rococo Rose Card Stock: 4″ x 5 1/4″ (mats for card front and for inner liner); 2 5/8″ x 4 3/4″ (mat under smaller DSP panel)

Very Vanilla Card Stock: 2 1/4″ Oval Stitched Die Cut (sentiment); 3 7/8″ x 5 1/8″ (inner liner)

Crumb Cake Card Stock: Heirloom Frames die cut and embossed frame

Pressed Petal Specialty DSP: 3 7/8″ x 5 1/8″ (card front); 2 1/2″ x 4 5/8″ (smaller DSP panel); envelope flap


If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!


Shop the Clearance Rack here. Earn FREE Stampin’ Up! Products – Join my Punkin Head Peppermint Rewards – My online customer thank you program!


Finn Fan Fix


 

I’ve been busy with my thinning scissors.  I really want to clip the Man – but…even though we’d never show in the breed ring (for many reasons!) – I would really hate for his coat to come back in “wrong”.  And I don’t have a good guard for my horse clippers.

So…dog coat thinning scissors it is.

Working on skirt and pantaloonies.  And around his collar…where the knots get.

Wait – what?  You can’t see a difference?!?

Look close.

I cut about two dog’s worth off! 🙁

Humor me, people!

TTFN
M

 

Categories: 2019-2020 Annual Catalog, Feminine, New Catalog Bundles, Sympathy | Tags: , , , | 12 Comments

Powered by WordPress.com.