Posts Tagged With: Presents & Pinecones DSP

Mornin’, y’all –  welcome to another edition of the Happy Stampers Blog Hop.  This is color week – and I know there are going to be a lot of great projects for you to see this week, so….be sure to check out all the offerings of the Ladies-Who-Hop!  

Here are the colors we used – a pretty good color palette for a Christmas-time project, don’t you think?

My project also played nicely into this week’s The Paper Players Tic-Tac-Toe challenge.  Check the bottom row! 🙂

This weekend is the OnStage Local event – which just so happens to have a venue in Atlanta!  Handy, huh!?  And the day before that, Brian King and Pam Morris are hosting a World Card Making Day event (a little later than the actual WCMD – but nicely aligned with OnStage!).  And, they’re doing a 3-d project swap.  So…today’s share is one of the projects I made for that swap!

At least – that’s how it started out – now I’m not sure I’m going to give it away! 😉  Only time will tell!

I used the Presents and Pinecones DSP and some Pretty Pines Thinlits.  Added in a Holly Jolly Layers sentiment and made…this.  Take a look-see:

This is a “Box in a Bag”!  Fun, right?  And really easy to make!  My friend Jari Francis made one a few days ago, and I decided to try it for myself.  She – and I – used the great tutorial by Diana Gibbs on SplitCoast Stampers.  You can check it out right here!

Although you can’t see it, the inside box is made from a piece of Cherry Cobbler card stock, cut to 4 1/2″ x 4 1/2″, put together exactly like the tutorial shows.

I used the pretty pine cones design from Presents and Pinecones for the “bag” part of the project.  Just like the tutorial stated, I ran a strip of Tear & Tape Adhesive along the bottom and one side of my 5 1/2″ x 11″ piece of DSP, then I pulled off the backing paper from the bottom strip.  I “rolled” my paper around my box.

But – I sort of messed up.  I started the paper – in the middle of the box as instructed – but I started with the edge that had the Tear & Tape on it.

Wrong.

Start with the edge that does not have the adhesive.  That way, when you get to the end, you’ll be all ready to stick everything together.  If you do it my way, you’ll have to stop and add another piece of adhesive, and you’ll have a “leftover” strip inside your box.

Like mine! 🙂

But, it worked out and I had my bag!  So it was time for some decoration.

I cut a 1″ x 11″ strip of Crumb Cake card stock and ran it a few times thru the Pine Bough TIEF.  That added a little texture and interest, and broke the fibers of the card stock a little, making it easier to roll around the bottom of the bag.

Which I did, using more Tear & Tape Adhesive.  When you do this – just take your time.  The most persnickety piece is making sure that the bottom of your strip stays aligned with the bottom of the bag/box.

At this point, I “designated” a “front” to the bag (I put the bag seam on one side, and the bottom strip seam on the front – knowing I’d cover it with my decorations.

I decorated the bag with Pretty Pines Thinlits pine boughs, cut from Garden Green card stock.  I cut several of each length and adhered them oh-so-artfully around the bottom of the bag, using Multi-Purpose Liquid Glue.  I wrapped some Cherry Cobbler Baker’s Twine three times around the bottom of the bag, adhering it with a Glue Dot at the front of the bag.  Before I stuck the final end down, I ran two Mini Pinecones embellishments thru the twine – and used the final Glue Dot to stick them in place.

Next I cut some pine cones, all using Crumb Cake card stock.  For two of them, I cut “backer” pine cones from Copper Foil, and adhered them with Liquid Glue.  I also cut a couple of berries in Cherry Cobbler.  Using more of the Liquid Glue, I adhered it all to the bag.

The bow is tied from three pieces of Bakers’ Twine – Garden Green, Cherry Cobbler and Gold – and adhered with Liquid Glue.  I left the tails long and used more Liquid Glue to stick them to the box.

With that all done, I addressed the top of the bag.  First I used my 1/2″ Circle Punch to cut holes in the top for my Cherry Cobbler 3/8″ Silky Taffeta Ribbon (which I’ll use to close the bag after putting my gift or a few pieces of chocolate inside!).

I made my tag by stamping the round image from the Host-exclusive set called Holly Jolly Layers (Holiday Catalog) onto Whisper White card stock.  I used my Garden Green and Cherry Cobbler Stampin’ Write Markers to color the stamp directly.  Then I cut it with a scalloped die from the Circles Layering Framelits.  I punched a hole thru the top with my 1/8″ Handheld Circle punch and then ran three strands of Baker’s Twine thru the hole.

I tied the label into one of my 1/2″ holes at the top of the bag, tying a final bow and….the bag was done! 🙂

This is a fun sized bag – it would easily hold a small (lightweight!) gift – socks?  Tie?  Action Figure? Candy?  And it’s really easy to get the box-in-a-bag part put together so that you can get to decorating – which is the fun part.  Hope you like!  And that you’ll give one a try yourself! 🙂

Now that you’ve seen my project, please take a little time to visit all the Happy Stampers Team blogs today!

If you click on the Next Blog button, you’ll go right to Jari Francis’ page.  And you can just click on the names below to go direct to all the blogs!

Amy Koenders

Mary Deatherage – YOU ARE HERE!

Jari Francis

Kristi Gray

Jaime Babarczy

Have fun on the Hop!

TTFN

Mary

HOST CODE FOR 1 NOV – 15 NOV: K9PECAM3

Cherry Cobbler Card Stock: 4 1/2″ x 4 1/2″ (box inside the bag)

Crumb Cake Card Stock:  1″ x 11″ (strip around bottom of bag); Pretty Pines die cuts

Garden Green Card Stock: Pretty Pines die cuts

Whisper White Card Stock: Holly Jolly Layers tag

Copper Foil:  Pretty Pines die cuts

If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!