Good morning, y’all It’s Thursday, which means it’s time for another Happy Inkin’ Thursday Blog Hop. We’ve got a sketch challenge to work with and I’m excited to see what everyone brings to the table. I just know you’re going to see a ton of awesome-ness on the hop today!
One of the best parts about getting home was being back in my craft room with my Online Exclusive pre-order!! Whoo-hoo! So – I pulled one out – the Festive Cheer bundle. And, while I was at it, some new 2026-2028 In Color Gingham Gallery DSP and the amazeballs new Textured Tree Ring 3D Embossing Folder. You’re going to be able to get ALL of these in just a couple weeks – on 1 July when the new Online Exclusives go live. Take a look-see:
And here’s our sketch!
I started by matting a 3 7/8″ x 5 1/8″ piece of the new Peaceful Pine 2026-2028 In Color Gingham Gallery DSP (available 1 July 2026) on a Basic White mat for the card front.
Next, I embossed a 3 1/2″ x 3 7/8″ piece of Pecan Pie cardstock in the new Textured Tree Ring 3D Embossing Folder (coming 1 July) and then matted it on Basic White and adhered it to the card front with Liquid Glue.
Using the cool sentiment die in the new Festive Cheer die set (coming 1 July) I cut out the NOEL sentiment from Basic White cardstock. On another bit of Basic White, I stamped the ornament in Cherry Cobbler and the leafy fill in Peaceful Pine ink.
I cut out the ornament with the die in the bundled Festive Cheer set. I also took a minute to cut out a bow, “string” and ornament hangar from Earthen Toned Metallic Specialty Paper.
I adhered the ornament hangar and string to the top of the die cut ornament with Liquid Glue. When it was set up, I adhered the little bow with Liquid Glue.
From a piece of Peaceful Pine cardstock and Peaceful Pine 2026-2028 In Color Pearlized Specialty Paper, I cut out two Festive Cheer pine boughs. I also cut out two Pecan Pie branches.
I adhered the two branches to the two pine boughs with Liquid Glue. Then I adhered the pearlized bough to the card front with Liquid Glue.
Using Stampin’ Dimensionals, I adhered the stamped/die cut ornament in position on the card front. I snipped the “string” to length and used a little Liquid Glue to adhere it to the branch. Note: the photo shows BEFORE I did the snipping!
Then I adhered the remaining die cut letters in place with Liquid Glue.
Using Stampin’ Dimensionals, I adhered the second completed pine bough to the card front.
I used the die in the set to cut out five Cherry Cobbler berries that I adhered with Liquid Glue.
I added four copper Adhesive-backed Metallic Gems (three to the card front and one small one on the stamped ornament in the sentiment) and the card front was done!
On the inside, I stamped a Festive Cheer sentiment in Peaceful Pine and a Cherry Cobbler bow on a Basic White panel. Across the bottom, I adhered a 3/8″ x 4″ piece of 2026-2028 In Color Gingham Gallery DSP with Liquid Glue.
I used Liquid Glue to adhere the panel to the inside of my Peaceful Pine card base, popped the card front on with Stampin’ Dimensionals and the card was done!
My Basic White Medium Envelope got the little Festive Cheer bow a few times in Cherry Cobbler ink on the front…
…and more of the 2026-2028 In Color Gingham Gallery DSP on the envelope flap.
Et Voila! I know – I know! Its only JUNE, Mary! Not time for Christmas yet! But…these new goodies – the Festive Cheer bundle, 2026-2028 In Color Gingham Gallery DSP AND the Textured Tree Ring 3D Embossing Folder – are going to be here SO SOON! Which means.. you’re going to want to grab these – and the rest of the amazing new things! – and get ahead on your Christmas Cards! Don’t we all plan to do that every year? This MIGHT be The Year! 😉
And – not for nothing… there’s “only” 190 days left till Christmas! 😉
I hope you like!
If you’d like to recreate this card, all the products and card cuts you’ll need are down below!
I’ve also created a printable PDF with written instructions and a list of the products used to create this project. You can download, print and/or save it by clicking this image:
Missed any tutorials? You can check out my past projects right here!
Now that you’ve seen my card, take a minute to hop thru all our projects today. If you click on the Next Blog button, you’ll go right to Karen’s page. And you can just click on the names below to go direct to all the blogs!
Mary Deatherage – This is me! 😎
Have fun on the Hop!!
TTFN
M
Connect with me! https://campsite.bio/stampsnlingers
CUSTOMER REWARDS
Earn 10% of your retail amount on all orders of $20 or greater! And you’ll be earning Punkin’ Head Peppermints – one peppermint for each $25 you spend thru my Online Store! When you gather up 16 Peppermint Points – you’ll be able to select a $40 gift right from me!
You’ll also be getting a link to my ZOOM The Craftroom (an exclusive TWICE-A-WEEK online event for my customers) and the monthly Online Tutorial – featuring the Lily of the Valley Bundle for June orders.
See my Customer Rewards page for full details.
Thursday After Lunch Bunch NOT-So Live Video!
Hey y’all – yes, I know I just got back in the groove – but…I have a hair appointment today on the other side of Atlanta. Which means…no LIVE video today. BUT – I DID pre-record a video for you and THAT will go live today over on my Stamps-N-Lingers YouTube Channel at our normal time of 1 pm Eastern. Hope you’ll come see what I made for you!
WANT TO JOIN US?
When you purchase the Starter Kit for $99 + taxes (if applicable), the kit ships for FREE and you get to pick $125 in Stampin’ Up! merchandise.
Head over to my Join My Team page here to see all the benefits of being a Demonstrator! I’d love to have you on my team and help you get all the discounts, and early goodies, and…ALL THE THINGS! 🙂
If you have any questions about joining, please drop me a note at stamps-n-lingers@comcast.net, I’d love to chat with you!
You can also see additional information on my Stampin’ Up! site here!
Click here to purchase your Starter Kit and Get Started!
Get the Stampin’ Up! Products Used in this Project: You’ll also need the Festive Cheer bundle, Textured Tree Ring 3D Embossing Folder and 2026-2028 In Color Gingham Gallery DSP when they’re available.
Card Cuts Used in This Project:
Peaceful Pine Cardstock: 4 1/4″ x 11″ (card base, scored and folded at 5 1/2″); Festive Cheer die cut pine bough
Pecan Pie Cardstock: 3 1/2″ x 3 7/8″ (embossed front panel); Festive Cheer die cut pine branch (x2)
Cherry Cobbler Cardstock: Festive Cheer die cut berries (x5)
Earthen Toned Metallic Specialty Paper: Festive Cheer die cut “string”, ornament hangar and bow
2026-2028 In Color Pearlized Specialty Paper: Festive Cheer die cut pine bough (in Peaceful Pine)
Basic White Cardstock: Festive Cheer die cut sentiment and stamped ornament; 3 5/8″ x 4″ (mat for embossed front panel); 4″ x 5 1/4″ (x2 – mat for card front and inner liner)
2026-2028 In Color Gingham Gallery DSP: 3 7/8″ x 5 1/8″ (card front); 3/8″ x 4″ (strip on inner liner); 2 1/4″ x 6″ (envelope flap)
If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!
Shop the Clearance Rack here. Earn FREE Stampin’ Up! Products – Join my Punkin Head Peppermint Rewards – My online customer thank you program!
Finn Fan Fix 
No FFF’s on Blog Hop Days!
TTFN
M
#20 Demonstrator in Sales in the US 2023-2024
#13 Demonstrator in Leadership in the US 2023-2024
#21 Demonstrator in Team Building in the US 2023-2024
KarensCardCorner
Stamp with Amy K
Stampin With Shirley G
Tarabeth Stamps
TL's Bright Spot