Good morning, y’all! It’s Thursday – which means it’s time for another Happy Inkin’ Thursday Blog Hop! We’ve got a sketch challenge to work with and I’m excited to see what everyone brings to the table – I just know you’re going to see a ton of awesome-ness on the hop today!
When I saw our sketch – I saw the new Wisteria Wishes bundle with it’s gorgeous die cut flowers (I LOVE wisteria!!) – which you’ll be able to pick up on 3 May. So out it came and I set it atop another beautiful design from the new Tea Boutique 6″ x 6″ DSP. Take a look-see:
And – here’s our sketch.
I borrowed the color palette from the Color Throwdown challenge.
I started with a pretty plaid paper in Starry Sky (one of our new In Colors – and available on 3 May!) from the new Tea Boutique 6″ x 6″ DSP and adhered it to the front of a Starry Sky card base with Liquid Glue.
Next, I took a blank piece of vellum from the new Lovely Layers Vellum (coming on 3 May – these are pre-cut at 3 3/4″ x 5″ – and you’ll find 20 printed sheets and 40 blank) and embossed it in the new Fern 3D Embossing Folder (avail 3 May).
I used Stampin’ Seal to adhere the embossed vellum panel to the front of the card base. Then I used Liquid Glue to adhere a cool Paper Lattice over the top (these are retiring so…get you a pack FAST!).
I used the leaves/bough die in the Wisteria Die set to cut two Soft Succulent boughs.
And I cut two detailed flowers from a piece of Tea Boutique DSP (in Fresh Freesia) and two of the less detailed flower dies in Blushing Bride.
Using small pieces of Stampin’ Dimensionals, I popped the detailed DSP flowers over the top of the Blushing Bride flowers.
I adhered the first bough (the one on the left side) with Liquid Glue. Then I adhered the first flower with more Liquid Glue.
Next – I added the second bough and the second flower with Liquid Glue.
I tied a little bow from some gorgeous new Starry Sky 1/8″ Metallic Woven Ribbon (y’all – this is SOO pretty – and you’ll be able to get it in ALL the new 2022-2024 In Colors!!) and adhered it with a Glue Dot – tucked in under the leaves.
Then, I stamped a sentiment from the Wisteria Wishes set in Starry Sky ink on a piece of Basic White – and cut it with the next-to-largest banner die in the new Stylish Shapes die set.
I used Stampin’ Dimensionals to tuck the sentiment up under the leaves and over top of the bow. Then I added some Champagne Rhinestone Basic Jewels and the card front was done.
On the inside, I stamped the Wisteria Wishes three-flower image in Blushing Bride on a Basic White panel. Then I added the bough in Soft Succulent – lining up the “branches” with the flowers. Finally, I stamped the flowers with the detailed image in Fresh Freesia. I stamped a second sentiment over the flowers in Starry Sky ink.
I used Liquid Glue to adhere the panel to a Blushing Bride mat and into the Starry Sky card base and the card was done!
My Basic White Medium Envelope got the Wisteria Wishes stamped flowers on the front…
…and a little more Tea Boutique DSP on the envelope flap.
Et Voila! Oh. My. Goodness, y’all! I am so in love with this set! We have wisteria growing wild all over here in the south – it’s actually sort of considered to be a weed. I mean…it’s EVERYWHERE! And I just sit back and smile cuz it’s SOO pretty! And the Wisteria Wishes – with the bundled Wisteria Dies – is perfect for making those gorgeous flowers for yourself! I am also pretty enamored with the Tea Boutique 6″ x 6″ DSP, aren’t you?! What an amazing variety of designs to choose from!
I hope you like!
If you’d like to recreate this card, all the products and card cuts you’ll need are down below!
And…I’ve also created a printable PDF with written instructions and a list of the products used to create this project. You can download, print and/or save it by clicking this image:
Missed any tutorials? You can check out my past projects right here!
Now that you’ve seen my card, take a minute to hop thru all our projects today. If you click on the Next Blog button, you’ll go right to Sue’s page. And you can just click on the names below to go direct to all the blogs!
Mary Deatherage – This is me! 😎
Have fun on the Hop!!
Connect with me! https://campsite.bio/stampsnlingers
HOST CODE FOR 1 APR – 15 APR: EHXUWRYF
Use this host code when you order $50 or greater and receive a free gift (AND the Monthly Card Tutorial) from me! If your order is over $150, please do not use this code, but you’ll still get the free gift. The free gift is your choice of any item valued up to $10.00 in any active Catalog! That includes some of the Host Exclusive stamp sets! See my Customer Rewards page for full details.
Note: Make sure that you can see my name on the final checkout page listed as your Demonstrator when you order so that you know that you’re ordering with me and you’ll get my rewards!
You’ll also be getting a link to my ZOOM The Craftroom (an exclusive TWICE-A-WEEK online event for my customers) and the monthly Online Tutorial. The April Tutorial features the Flowering Tulips Bundle!
Thursday After Lunch Bunch
I’m planning to go live today on my Stamps-N-Lingers Facebook Page with a new project. We’ll start at our normal time of 1pm Eastern. Come on over and see what I’m up to today! Look forward to seeing you then!
Interested in Joining Us?
If you’d like to join our team, we’d love to have you! You can become a demonstrator for just $99! We welcome all types of Demonstrators from those only purchasing to get the discount for themselves to those who want to run a business and those anywhere in between! Look at those faces – you KNOW we have a lot of fun! 🙂
When you purchase the Starter Kit for $99 + taxes (if applicable) the kit ships for FREE and you get to pick $125 in Stampin’ Up! merchandise!
And – if you’re interested in joining the team, then you can preorder right now from the new 2022-2023 Annual Catalog – and get the discount for yourself! You can choose to add items from the Pre-Order list to your Starter Kit – pick $125 worth of product and pay just $99 plus tax – and you’ll even get FREE SHIPPING! Head over to my joining page here to see the benefits of being a Demonstrator and to sign up now! I would love to have you on my team and help you get all the discounts, and early goodies, and…ALL THE THINGS! 🙂
If you have any questions about joining, please drop me a note at firstname.lastname@example.org, I’d love to chat with you!
Get the Stampin’ Up! Products Used in this Project:
Card Cuts Used in This Project:
Starry Sky Cardstock: 4 1/4″ x 11″ (card base, scored and folded at 5 1/2″)
Blushing Bride Cardstock: 4″ x 5 1/4″ (mat for inner liner); Wisteria Die cut flowers (x2 – the larger piece of the flower)
Soft Succulent Cardstock: Wisteria Die cut leaves (x2)
Lovely Layers Vellum (blank): behind Paper Lattice
Basic White Cardstock: Stylish Shapes die cut label (sentiment); 3 7/8″ x 5 1/8″ (inner liner)
Tea Boutique 6″ x 6″ DSP: 4 1/4″ x 5 1/2″ (card front); Wisteria Die cut flowers (x2 – the smaller piece of the flower) 3″ x 6″ envelope flap
If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!