Happy Saturday, y’all! Hope that your weekend dawned bright and clear and that you’re getting ready to enjoy some much deserved rest and relaxation!
Last week, when I did my Blog Candy give-away (if you haven’t entered, there’s still a little time today – check it out here!) – many of you mentioned the A Nice Cuppa stamp set and the oh-so-cute matching Framelits called Cups & Kettle as being some of your very favorites! Well, I really like that bundle, too, so that’s what I used – along with some of the coordinating Have a Cuppa DSP – to put together today’s share. Take a look-see:
My layout design was inspired by the Sunday Stamps sketch #119. Head over when you’re done here and check out what all the other crafty folks have done with this one!
I started by building the sculptural element at the top – it looks like a flap to me, so that’s what I keep wanting to call it. “Sculptural element” sounds a lot fancier, doesn’t it? 😉
I used my Lots of Labels Framelits – taking the largest of the dies and laying it on a 4″ wide piece of Whisper White card stock. I only laid the die part way down the piece of card stock – so that it would cut out just the shape I wanted. In order to just cut the shape I needed, but leave the rest of the card stock – I only rolled it part way thru the Big Shot, kind of estimating where the “curvy” part of the die ended.
Once I’d rolled it only part way thru the Big Shot, I pulled it off the platform and just snipped the sides straight across. That made my flap!
That was possibly the most confusing thing I’ve ever written for you guys – sorry! My advice? Get out your Lots of Labels and a piece of paper – and get it laid out on your platform. I think it’ll become clear to you when you can see it. I could have, of course, taken pictures as I did it, but that would have made way too much sense, so it would have been crazy and I’m not crazy!!
I ran that back thru the Big Shot, this time inside my Lovely Lace TIEF. With the flap ready to go – I SNAILd it to a piece of the Have a Cuppa DSP, and then SNAILd that to a Basic Black card stock mat.
The Nice Cuppa tea cup is stamped in Mint Macaron on a piece of Whisper White card stock. Then I added the sentiment in Tuxedo Black Memento Ink and cut it out with its matching Cups & Kettle Framelit. I topped off the “i” with a tiny seed Pearl Basic Jewel.
The little heart and the tea bag tag are also both from A Nice Cuppa – I stamped the heart in Melon Mambo (I stamped it off once first) and the tag in Tuxedo Black. On the center of the tag, I wrote a “u” with my Melon Mambo Stampin’ Write Marker. Both of these have matching dies in the Cups & Kettle Framelits set!
I used a short length of Melon Mambo Baker’s Twine from the new Baker’s Twine Combo Pack for the “tea bag”. I pulled a few strands out of the twine first, just to make it a little thinner. I adhered it to the back of my tea cup with some Multi-Purpose Liquid Glue and then used my Handheld Stapler to attach the two little tags. Then I popped the whole shootin’ match on the card front with Stampin’ Dimensionals!
The final element of the tea cup focal point is the heart-shaped steam (yes, I’m so good – I can even make steam shape itself into a heart. Don’t envy me!). I just used the appropriate die cut and cut a little more of the Have a Cuppa DSP, and then used Liquid Glue to adhere it over the tea cup.
The ribbon accent is a piece of Basic Black 3/8″ Stitched Satin Ribbon, wrapped around the card front and adhered in the back with scotch tape. Then I made a “faux bow” by just tightly tying another short length of the ribbon around that. And that was it!
On the inside, I went old school. I used another piece of the Have a Cuppa DSP across the bottom and then adhered more of the Basic Black ribbon across it (secured in back with scotch tape) – and it all went on a Whisper White card stock panel, and then that was layered on Basic Black.
I SNAILd that into my Melon Mambo card base and popped the front on with Stampin’ Dimensionals and that was it for the card!
On the Whisper White Medium envelope, I stamped three of the steamy heart images – one each in Melon Mambo, Mint Macaron and Basic Black. Then I added a bit of an embellishment to each one with a Stampin’ Write Marker…
…and cut a liner from the Have a Cuppa DSP using the Envelope Liner Framelit!
Et Voila! I particularly love this tea cup die cut. How cute would that be on invitations to a tea party? Or to a Red Hat party?? I’ll bet you could even figure a way to put a real tea bag behind the cup! 😉 This is such a fun stamp set and framelits – and you can get it all bundled together and save 15%!
I’ll be back tomorrow with another fun card. Don’t forget that, while the Fine-Tip Glue Pen ordering special is over, you can still get DOUBLE Peppermint rewards for a few more days!
STAMPS-N-LINGERS SALE-A-BRATION ORDERING SPECIAL
All orders of $25 or greater (before shipping and taxes) placed through my online store from now through the 31 January will earn double Punkin Head Reward Points!! Let me know if you have any questions. Check out all the details here! Happy shopping!
HOST CODE FOR 16 JAN – 31 JAN 16: 7XVU6YRX
Use this host code when you order and receive a free gift from me! But, if your order is over $150, please don’t use this code (you’ll miss out on your own Stampin’ Rewards if you use it) but you’ll still get the free gift. The free gift for Jan is your choice of any item valued up to $8.00 in the brand new 2015-16 Annual Catalog or the 2015 Occasions Catalog.
WEEKLY DEALS FOR 19 Jan – 25 Jan 16!! Click here to see the Weekly Deals from Stampin’ Up! in my online store. The Weekly Deals are only while supplies last and only available at these great prices through 25 Jan!
Built for Free Using: My Stampin Blog
STAMPIN’ UP! PRODUCTS USED IN TODAY’S CARD:
Built for Free Using: My Stampin Blog
CARD CUTS USED IN TODAY’S PROJECT
Melon Mambo Card Stock: 4 1/4″ x 11″ (card base, score and fold at 5 1/2″)
Basic Black Card Stock: 4 1/8″ x 5 3/8″ (front mat and inner liner mat)
Whisper White Card Stock: 4″ x ~2 1/2″ (embossed flap on front); 4″ x 5 1/4″ (inner liner); tea cup, tags and heart die cuts
Have a Cuppa DSP: 4″ x 5 1/4″ (card front); 5/8″ x 4″ (inner liner strip); steamy heart die cut; envelope liner
If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!
Shop the Clearance Rack here. Earn FREE Stampin’ Up! Products – Join my Punkin Head Peppermint Rewards – My online customer thank you program!
BACKORDER LIST AS OF 22 Jan 16
- 140566: Honeycomb Embellishments
- 140550: Blushing Bride Glimmer Paper
- 140503: Happy Home Stamp Set (Clear)
140622: Big Shot Framelits Large Numbers
140561: Pool Party 3/8″ Glitter Ribbon
- 141897: Clear Wink Of Stella Brush
How cute Mary! Love the little teacup with the tag, the staple is just perfect! Fantastic card! 🙂