Stampin’ Up! Angled Snowman Season!

Mornin’, y’all!  Well – Friday again!  Whoo-hoo!  I’m headed north today to get my hair cut – in preparation for next week’s OnStage!  I’m excited for that – it’s always great to see friends from around the country – and we’ll get to see (and order from!!) the new Occasions Catalog, too!  Can you believe it’s almost time for that!?  That means it’s almost 2020.

Where are the flying cars?!?  That’s all I want to know.  I’m pretty sure George Jetson promised flying cars by now… 😉

Anywho – more on OnStage as we get closer!

My card today is ready for Christmas!  And snow.  Which I hope we do NOT get.  No offense to snow or folk who love snow, but…I’m WAY okay without it!  But – that does mean that the only snowmen I’m going to be able to make are in paper.  Thankfully I’ve got the Snowman Season bundle and some cool and frosty Let It Snow Specialty DSP.  Take a look-see:

The layout for this one is from the CAS(E) This Sketch challenge this week!

And the color scheme is from the Hand Stamped Sentiments challenge!

I started with a snowy piece of Let it Snow Specialty DSP that I matted on Real Red for the card front.  Then I cut a second design with a Stitched Rectangle Die and adhered it with Liquid Glue.

On a piece of Whisper White, I stamped the sentiment from Snowman Season in Shaded Spruce and cut it with a smaller Stitched Rectangle Die.

I popped the sentiment onto the card front with Stampin’ Dimensionals.

Using Glue Dots, I wound a piece of Real Red 1/8″ Curly Ribbon in a rough figure-8 to create a bow-ish effect.

I cut the snowman from one of the pieces of glittery Let It Snow Specialty DSP using the Snowman Builder Punch (bundled with the Snowman Season stamp set).

I pulled out the Let It Snow Embellishment Kit and added a couple of branch arms, some coal for the eyes and buttons (these are little enamel shapes in the kit!) and used some Liquid Glue to adhere a Shaded Spruce cap.

Then I popped him onto the card front with Liquid Glue and Stampin’ Dimensionals.

I added some Red Rhinestone Basic Jewels and the card front was done!

On the inside, I added a second sentiment from Snowman Season in Shaded Spruce to a Whisper White panel.  Over top I stamped some snowflakes in stamped-off-once Coastal Cabana.  A single Red Rhinestone Basic Jewel finished it off.

I used Liquid Glue to adhere the panel to a Real Red mat and into my Shaded Spruce card base, popped the card front on with Stampin’ Dimensionals and the card was done!

My Whisper White Medium Envelope got more Coastal Cabana snowflakes on the front (I stamped the image twice without re-inking to get the “second” color!)…

…and I added more of the snowy paper from the Let It Snow Specialty DSP to the envelope flap.

Et Voila!  The Snowman Season stamp set lets me make my kind of snowman.  A NOT-snow man, man!  And it’s so cool that the Snowman Builder punch will actually punch out one of the glittery images from the Let It Snow Specialty DSP, don’t you think?  I hope you like!





P.S.  Happy BIRTHDAY, Mom! 🙂


Use this host code when you order and receive a free gift from me! But, if your order is over $150, please don’t use this code (you’ll miss out on your own Stampin’ Rewards if you use it) but you’ll still get the free gift. The free gift is your choice of any item valued up to $10.00 from any active catalog! And – you can even select one of the Host-exclusive sets! See my Rewards page for more details.

Moose Punch Has Sold Out and Will Not Return

Stampin’ Up! posted this update late last night:

Our inventory of Moose Punch (item 150652) has been depleted and is no longer available for purchase.

That means the Merry Moose Bundle is also sold out and can’t be purchased.  But the good news is that the cute Merry Moose stamp set is still available!


I’ve had mine for a minute now – and I love it!  It cuts smooth and straight on a nice stable base!  You’re going to be happy to have it!  And just in time for all your Holiday crafting, too!

Paper Trimmer Deets

Item: 152392 | $25.00

  • 15-3/8 x 8 x 1/2” (39 x 20.3 x 1.3 cm)
  • Includes 1 cutting blade and 1 scoring blade.
  • Includes imperial and metric measurements.
  • Ruler and grid protected by durable plastic cover.
  • Point on cutting handle for precise measuring.
  • Right-side grid for cutting thin strips.
  • Cutting Blades Multipack will be available to purchase in January 2020.
    • Cutting Blades Multipack $12.00
    • Each Cutting Blades Multipack unit contains four blades.

So – get on over and get it right here!

Christmastime is Here is…HERE!!

Click the picture below to open a flyer with all the details – or just go right here to my Online Store to get these goodies for yourself right now!

Get the Stampin’ Up! Products Used in This Project:     

Card Cuts Used in This Project:  

Shaded Spruce Card Stock: 4 1/4″ x 11″  (card base, scored and folded at 5 1/2″)

Real Red Card Stock:  4″ x 5 1/4″ (mats for card front and for inner liner)

Whisper White Card Stock:  3 7/8″ x 5 1/8″ (inner liner); 7/8″ x 3″ Stitched Rectangle Die (sentiment)

Let It Snow Specialty DSP:  3 7/8″ x 5 1/8″ (card front); 2 1/4″ x 3 1/4″ Stitched Rectangle Die Cut (angled panel); Punched snowman on front; envelope flap

If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions. Happy Stamping!

Shop the Clearance Rack here. Earn FREE Stampin’ Up! Products – Join my Punkin Head Peppermint Rewards – My online customer thank you program!

Finn Fan Fix


Yesterday was customer-thank-you-gift mailing day here.

And my side-kick was right there with me!


You know – I may have mentioned this a time or two…

Boy do I love this little dog of mine. 🙂


Categories: 2019 Holiday Catalog, Christmas, New Product | Tags: , , , | 12 Comments

Post navigation

12 thoughts on “Stampin’ Up! Angled Snowman Season!

  1. What a cute card! Love that happy snowman…sure hoping that the weather cooperates for everyone next weekend for the event! Finn does look like he’s a very good helper…you put those packages in the bag mom, I’ll take a little nap over here. 😉

    • stampsnlingers

      Yep – clear division of labor – each suited to their thumb-status! 😉 Thanks much, Amy! 🙂

  2. Tammy Gilbert

    Boy did I love this email, I was running out of ideas for the snowman , I don’t want snow either. Hugs Tammy

  3. A lovely card – and I like seeing the inside too – enjoy your On Stage – I’m hoping it’s nearly 2020 not 2021 lol! Thanks for joining us at HSS this week.

    • stampsnlingers

      Upon second look at the calendar – yep! Almost 2020 – NOT 2021! Thanks so much, Fiona! Appreciate you stopping by! 🙂

  4. Karen L

    2021!!!! Geez, I hope not!! Maybe 2020…….time goes too fast as it is!! Yep, you have a faithful companion in Finn!! Our little guy is a cat, but he seems to not let us out of his sight much either!! Gotta check the calendar just in case I’m the one that is wrong! 🙂

    • stampsnlingers

      Oh boy! No WONDER there aren’t any flying cars – I’m still a year early! Yep – let’s HOPE it’s not 2021 YET! Thanks so much, Karen! Hug your furry side-kick for me! 🙂

  5. Great idea to use glimmer paper for your snowman! Love all the little details on the card. It’s a feast for the eyes. I too am a fan of Finn’s. He looks to be a wonderful helper. Thanks for playing at Hand Stamped Sentiments!

    • stampsnlingers

      Thanks much, Genevieve – I love that we can punch those little guys out with a PUNCH!! Sweet! Appreciate you stopping by! 🙂

  6. Jenny Engelke

    Super cute! You can’t beat those felt accessories for these little snowmen! So adorable! Thanks for playing along with us at HSS!

    • stampsnlingers

      Thanks so much, Jenny! Gotta love this set. Appreciate you stopping by! 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

Powered by